C-Shaped Steel Purlins Cold Formed Machine Steel Construction Roof Beams
C-shaped steel purlins(C purlin roll forming machine) are highly efficient economically cut sections (there are also cold-formed thin-walled sections, pressed steel sheets, etc.), which, due to their reasonable cross-sectional shape, enable the steel to perform more efficiently and increase its cutting capacity. Unlike ordinary I-beams, the wing embroidery of H-beams is widened and the inner and outer surfaces are usually parallel so that they can be easily connected to other elements with high strength screws.
The profile purlins are very useful and versatile and have advantages over other steel purlins. Therefore, in the process of house construction, you can choose the better profile C purlins(C profile roll forming machine) to ensure the safety and practicality of the house construction!
Flow chart of C-shaped purlins roll forming machine:
Manual decoiler--Guiding--Leveler--Hydraulic punch stands--Roll forming machine--Hydraulic cut
This cold bending production line we exported to Poland, the customer used to produce steel structure. c-beam equipment is a common equipment in the construction industry, can be used in many industries, in addition to the roof support accident, but also can be used for the house column, in many solar energy system, also use c-beam for bracket.
Post-shear
Profile C roll forming machine technical specification:
| C-Shaped Steel Purlins Cold Formed Machine Steel Construction Roof Beams |
| Standard configurations |
| Item | Specification |
| Machinable Material : | Type : | A) Galvanized Coil |
| B) Carbon Steel |
| Thickness : | 1.5-3mm |
| Yield strength : | ≤350 Mpa |
| Working speed : | 0-15m/min without punch |
| Machine colour : | Industrial blue |
| Delivery : | 100 working days |
| Warranty : | 24 months |
| Uncoiling : | Type : | Manual uncoiling |
| Capacity : | 3 tons |
| Leveler : | Type : | equipped with roll forming machine |
| Punch system : | Type : | Hydraulic punch station |
| Motor power : | According to your drawing |
| Roll forming machine : | Forming steps : | 18 |
| Motor power : | 15kw |
| Transmission system : | Chain drive |
| Support structure : | Cast iron stands |
| Material of rollers : | GCr15 tempering quenching chrom plating |
| Diameter of shafts : | φ75mm |
| Hydraulic cutting system : | Type : | Hydraulic cut |
| Motor power : | 7.5kw |
| Length encoder : | Koyo |
| Cutting length : | Any length |
| Length tolerance : | ≤1mm |
| Out table : | Type : | Manual |
| Length : | 4m |
| Hydraulic station : | Motor power : | 15kw |
| PLC Control : | Language : | English-Chinese |
| Invertor : | Yaskawa |
| PLC : | Siemens |
| Electricity : | 380V 50Hz 3Ph or according to your requirement |
Product Tags:
|
|
15kw Steel Frame Roll Forming Machine 0-15m/Min 380V Images
|
